A Highly Stable (4, 8)-Connected Tb-MOF Exhibiting Efficiently Luminescent Sensing towards Nitroimidazole Antibiotics

A robust 4,8-connected Tb-based metal-organic framework (Tb-MOF) with paddle wheel-shaped {Tb₂(COO)₄} subunits extended by C₃-symmetric 3,3',3''-[1,3,5-benzenetriyltris(carbonylimino)]tris-benzoate connector was hydrothermally synthesized, showing highly environmental stability, good dispersion and intense green emission in water system. Resulting critically from the well suppressed absorption towards the excitation energy, the Tb-MOF exhibits rapid and efficient fluorescent response towards nitroimidazole antibiotics with strong quenching constants and low detection limits of 1.59 × 10⁴ m ^–1 and 2.4 μM for metronidazole as well as 1.62 × 10⁴ m ^–1 and 2.9 μM for dimetridazole. Moreover, the sensitive and selective identification of the Tb-MOF has strong anti-interference and excellent regeneration ability, which endows the promising applications of the Tb-MOF as fluorescent sensing materials.     

Trichothecenes in Food and Feed,Relevance to Human and Animal Health and Methods of Detection: A Systematic Review

Trichothecene mycotoxins are sesquiterpenoid compounds primarily produced by fungi in taxonomical genera such as Fusarium, Myrothecium, Stachybotrys, Trichothecium, and others, under specific climatic conditions on a worldwide basis. Fusarium mold is a major plant pathogen and produces a number of trichothecene mycotoxins including deoxynivalenol (or vomitoxin), nivalenol, diacetoxyscirpenol, and T-2 toxin, HT-2 toxin. Monogastrics are sensitive to vomitoxin, while poultry and ruminants appear to be less sensitive to some trichothecenes through microbial metabolism of trichothecenes in the gastrointestinal tract. Trichothecene mycotoxins occur worldwide however both total concentrations and the particular mix of toxins present vary with environmental conditions. Proper agricultural practices such as avoiding late harvests, removing overwintered stubble from fields, and avoiding a corn/wheat rotation that favors Fusarium growth in residue can reduce trichothecene contamination of grains. Due to the vague nature of toxic effects attributed to low concentrations of trichothecenes, a solid link between low level exposure and a specific trichothecene is difficult to establish. Multiple factors, such as nutrition, management, and environmental conditions impact animal health and need to be evaluated with the knowledge of the mycotoxin and concentrations known to cause adverse health effects. Future research evaluating the impact of low-level exposure on livestock may clarify the potential impact on immunity. Trichothecenes are rapidly excreted from animals, and residues in edible tissues, milk, or eggs are likely negligible. In chronic exposures to trichothecenes, once the contaminated feed is removed and exposure stopped, animals generally have an excellent prognosis for recovery. This review shows the occurrence of trichothecenes in food and feed in 2011–2020 and their toxic effects and provides a summary of the discussions on the potential public health concerns specifically related to trichothecenes residues in foods associated with the exposure of farm animals to mycotoxin-contaminated feeds and impact to human health. Moreover, the article discusses the methods of their detection.     

Peroxidase-Like Platinum Clusters Synthesized by Ganoderma lucidum Polysaccharide for Sensitively Colorimetric Detection of Dopamine

The sensitive and selective detection of dopamine (DA) is very important for the early diagnosis of DA-related diseases. In this study, we reported the colorimetric detection of DA using Ganoderma lucidum polysaccharide (GLP) stabilized platinum nanoclusters (Pt_n-GLP NCs). When Pt₆₀₀-GLP NCs was added, 3,3’,5,5’-tetramethylbenzidine (TMB) was rapidly catalyzed and oxidized to blue oxTMB, indicating the peroxidase-like activity of Pt₆₀₀-GLP NCs. The catalytic reaction on the substrate TMB followed the Michaelis-Menton kinetics with the ping-pong mechanism. The mechanism of the colorimetric reaction was mainly due to the formation of hydroxyl radical (•OH). Furthermore, the catalytic reaction of Pt₆₀₀-GLP NCs was used in the colorimetric detection of DA. The linear range for DA was 1–100 μM and the detection limit was 0.66 μM. The sensitive detection of DA using Pt-GLP NCs with peroxidase-like activity offers a simple and practical method that may have great potential applications in the biotechnology field.     

Detection challenges in quantitative polymer analysis by liquid chromatography

Accurate quantification of polymer distributions is one of the main challenges in polymer analysis by liquid chromatography. The response of contemporary detectors is typically influenced by compositional features such as molecular weight, chain composition, end groups, and branching. This renders the accurate quantification of complex polymers of which there are no standards available, extremely challenging. Moreover, any (programmed) change in mobile‐phase composition may further limit the applicability of detection techniques. Current methods often rely on refractive index detection, which is not accurate when dealing with complex samples as the refractive‐index increment is often unknown. We review current and emerging detection methods in liquid chromatography with the aim of identifying detectors, which can be applied to the quantitative analysis of complex polymers.     

Graphene and Carbon Nanotube-based Electrochemical Sensing Platforms for Dopamine

Dopamine (DA) is an important neurotransmitter, which is created and released from the central nervous system. It plays a crucial role in human activities, like cognition, emotions, and response to anything. Maladjustment of DA in human blood serum results in different neural diseases, like Parkinson's and Schizophrenia. Consequently, researchers have started working on DA detection in blood serum, which is undoubtedly a hot research area. Electrochemical sensing techniques are more promising to detect DA in real samples. However, utilizing conventional electrodes for selective determination of DA encounters numerous problems due to the coexistence of other materials, such as uric acid and ascorbic acid, which have an oxidation potential close to DA. To overcome such problems, researchers have put their focus on the modification of bare electrodes. The aim of this review is to present recent advances in modifications of most used bare electrodes with carbonaceous materials, especially graphene, its derivatives, and carbon nanotubes, for electrochemical detection of DA. A brief discussion about the mechanistic phenomena at the electrode interface has also been included in this review.     

导电聚苯胺线膜修饰ZnO纳米棒阵列的可控制备及其紫外探测性能

基于p-n结的光生伏特效应可构筑性能优异的UV探测器,本文采用水热法可控制备竖直排列的氧化锌纳米棒阵列(n型ZnO-NRs),利用原位聚合法在ZnO-NRs表面上修饰p型聚苯胺线膜(PANI-NWs),再组装成ZnO-NRs与ZnO-NRs/PANI-NWs紫外探测器。通过扫描电镜(SEM)、X射线衍射仪(XRD)、紫外可见漫反射(UV-Vis)光谱表征样品的形貌、结构与光学性质。并通过电化学工作站测定电流-时间(I-t)和电流电压(I-V)曲线,表征其光响应性能。结果表明,制备的ZnO-NRs/PANI-NWs材料阵列排列整齐,界面接触良好,孔隙均匀。ZnO-NRs/PANI-NWs探测器在检测365 nm紫外光时,光电流为2.73×10^-4 A;检测254 nm紫外光时,光电流为1.44×10^-4 A。其光电流为ZnO-NRs探测器的4~10倍,ZnO-NRs和PANI-NWs之间形成的p-n结增强了光电导。用ZnO-NRs/PANI-NWs材料组装成的UV探测器体现出稳定性好,响应速度快,恢复时间短,电流增益高等优点,为开发高性能紫外光电探测器提供数据支撑。     

Determination of cobalt ion based on polyethyleneimine modified silver nanoclustersEI北大核心CSCD

PolyethyleneiminePEImodified silver nanoclustersAg NCswere synthesized through chemical reduction method by using PEI as stabilizerAgNO3 as silve source and ascorbic acid as reducing agentand it was applied to the detection of cobalt ions. It was found that the fluorescence of the silver nanoclusters was quenched by Co2+ for the aggregation of PEI-Ag NCs caused by the coordination between cobalt ion and amino group on polyethyleneimine. Under the optimized experimental conditionsthe fluorescence quenching degree of PEI-Ag NCs was piecewise linear with the concentration of cobalt ion in the range of 8.30×10-7-4.17×10-4 mol/L and the detection limit was 0.41 μµmol/L. © 2022, Youke Publishing Co.,Ltd. All rights reserved.     

Electrochemical detection of nitrate,nitrite and ammonium for on-site water quality monitoring

This review examines the most recent electrochemical developments for nitrate, nitrite and ammonium detection for on-site water monitoring. There remains a high demand for effective field-based detection of the dissolved inorganic nitrogen (DIN) analytes to aid in mitigating nitrogen loading. Electrochemical approaches show increasing potential to fill this role as advancements in nanotechnology continually improve analytical performance and on-site applicability. However, translating these improvements into the field still faces the resonating challenges of reaching analytical proficiency (selectivity, sensitivity, robustness, stability), practical end-user functionality, minimal matrix interferences and cost effectiveness. Herein, we elaborate on these challenges via a critical evaluation of current studies and examine how realistic the prospects of on-site nitrate, nitrite and ammonium are. We also present recommendations in addressing these gaps to conclude the review.     

Removal of single and dual ring thiophene’s from dodecane using cavitation based processes

Utilising cavitation for enhancing oxidative desulphurization has been investigated for nearly-two decades with recent investigations shifting focus from low-capacity acoustic cavitation (AC) to scalable hydrodynamic cavitation (HC). This work focuses on developing a viable means for removing thiophene’s from fuels. In the first phase of this work, use of vortex based HC devices for removal of single and dual ring thiophenes from dodecane was investigated. HC was shown to be able to remove single ring thiophene from dodecane without using any external catalyst or additives. However, in absence of catalyst or additives, it was not possible to remove dual ring thiophenes such as dibenzothiophene using HC. Therefore, in the second phase of this work, various strategies based on use of catalyst or additives to augment cavitation based process were investigated. AC based experiments were opted for shortlisting suitable catalysts and additives for intensifying cavitation based processes. The influence of using oxidant (H₂O₂) and carboxylic acid catalysts on efficacy of removal of dual ring thiophenes is presented. Several conditions were tested, and the optimal volumetric ratios of 0.95 v/v % H₂O₂ and 6.25 v/v % HCOOH was identified and utilised throughout the remainder of the study. Regeneration of extractant which accumulates oxidised sulphur species from dodecane was also investigated using AC. The additives and process conditions reported in this work are useful for enhancing desulphurization performance.     

Tutorial review on validation of liquid chromatography–mass spectrometry methods: Part II

This is the part II of a tutorial review intending to give an overview of the state of the art of method validation in liquid chromatography mass spectrometry (LC–MS) and discuss specific issues that arise with MS (and MS–MS) detection in LC (as opposed to the “conventional” detectors). The Part II starts with briefly introducing the main quantitation methods and then addresses the performance related to quantification: linearity of signal, sensitivity, precision, trueness, accuracy, stability and measurement uncertainty. The last section is devoted to practical considerations in validation. With every performance characteristic its essence and terminology are addressed, the current status of treating it is reviewed and recommendations are given, how to handle it, specifically in the case of LC–MS methods.